5x100 / 5x112 Wheel Spacer – 5 mm, 66.6 mm CB, No Lip | 130-05-66

Out of stock
SKU: 130-05-66 Barcode: 642968424773
Regular price $0.00
Product details
  • Vendor AutoTuercas.com
  • SKU 130-05-66
  • Barcode 642968424773

Do you have questions about this product?

Ask an expert!

Euro-Style Wheel Spacer – 130-05-66

5 mm wheel spacer with a 66.6 mm center bore, without a centering lip or studs. Series 130 identifies the no-lip design.

Priced per piece. Minimum purchase: 2 pieces. This is not a per-pair price.

Specifications

Product Code 130-05-66
Listed Bolt Patterns 5x100 / 5x112
Thickness 5 mm
Center Bore 66.6 mm
Centering Lip No lip
Studs Not included
Price Basis Per piece
Minimum Purchase 2 pieces

Recent U.S.-Market Application Reference — 5x112 / 66.6 mm

The following vehicles share a 5x112 bolt pattern and a nominal 66.6 mm hub diameter, often specified as 66.56 mm. These are dimensional references only, not manufacturer-approved applications for this specific spacer. Listed years are limited to the reviewed range and do not imply confirmation for later years.

U.S. Reference Years Make Model / Chassis Bolt Pattern Nominal Hub Bore
2024–2025 Mercedes-Benz E-Class Sedan W214 5x112 66.6 mm
2024–2025 Mercedes-Benz CLE 300 / CLE 450, C236 coupe / convertible 5x112 66.6 mm
2022–2025 Mercedes-Benz C-Class Sedan W206 5x112 66.6 mm
2022–2025 BMW i4 G26 5x112 66.6 mm
2020–2025 Toyota GR Supra A90 / A91 5x112 66.6 mm
2019–2025 BMW 3 Series Sedan G20 5x112 66.6 mm
2019–2025 BMW X5 G05 5x112 66.6 mm
2017–2023 Mercedes-Benz E-Class W213 5x112 66.6 mm

5x100 Pattern: No vehicle applications with both a 5x100 bolt pattern and a nominal 66.6 mm hub bore have been confirmed in this review. Do not apply the 5x112 table to 5x100 vehicles or assume compatibility based on bolt pattern alone.

Important — 5 mm Spacer Fitment: Verify the actual spacer bore and hole dimensions, manufacturer approval for the exact vehicle and axle, and whether enough of the original hub lip remains to center the wheel after fitting this no-lip 5 mm spacer. Confirm that the spacer seats fully against the hub and the wheel seats fully against the spacer. Verify wheel and brake clearance, correct wheel-bolt length, thread, seat type, and adequate thread engagement. Hardware requirements differ between BMW, Mercedes-Benz and Toyota. No studs included. Matching bolt pattern and nominal bore alone do not guarantee fitment.